-40%

Dental Composite Resin Heater Material Soften Warmer 40/45/50℃ Adjustable

$ 42.23

Availability: 13 in stock
  • MPN: D1401400204
  • Intended Use/Discipline: Dental Laboratory
  • Item must be returned within: 60 Days
  • All returns accepted: Returns Accepted
  • Model: 40/45/50℃
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Restocking Fee: No
  • Input: 100-240V AC 50/60Hz
  • Return shipping will be paid by: Buyer
  • Country/Region of Manufacture: China
  • Condition: New
  • Brand: Unbranded

    Description

    Product Description
    Resin heater is designed for heating composite resin material to improve the flow of its adhesive properties.
    At the same time it can also be used to heat adhesive when used manual equipment, filter cover.
    1-  Light filter;
    2-  Heating plate;
    3-  Heating main body;
    4-  Resin base;
    5-  Temperature indicator;
    6-  Temperature selection and the on / off button;
    7-  DC power.
    Operation
    1. DC Plug the power adapter into the external socket to connect the power;
    2. Green light is shining after the power supply the default temperature of 40 ℃;
    3. One key operation, three temperature precise adjustable:
    4. When the green light is standing, the temperature is 40 ℃;
    5. Once again the key shows the yellow light shining, and the representative continues to heat until the
    yellow light is often bright and the temperature is
    45 ℃;
    6. Once again the key shows the red light shining, and the representative
    continues to heat until the red light is often bright and the temperature is 50℃
    Temperature
    Light color
    Heating
    Reached the preset temperature
    40

    Green
    Shiny Green LED
    Green LED often bright
    45

    Yellow
    Shiny Yellow LED
    Yellow LED often bright
    50

    Red
    Shiny Red LED
    Red LED often bright
    Notice:
    Quick flash means heating up, when the temperature reaches 50℃, then press the key it can be cooled to 40℃;
    The light slowly flashes when cooling down.
    Cleaning and disinfection
    All the parts can be disinfectant cloth to wipe clean. Don't take any part in any liquid immersion disinfection.
    Not 135℃ sterilization.
    Technical parameters
    power adapter
    Input : 100-240V AC 50/60Hz
    Output : 12V  3A
    FDA Statement

    The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry
    agencies.
    If so, you can bid on this item only if you are an authorized purchaser.
    If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.