Dental Light Cure Composite Resin Etching Adhesive /Temporary Filling Flow Resin

Description

Dental Light Cure Composite Resin Etching
Adhesive kit
INDICATIONS FOR USE:
Direct restoration for all class caries.
Restoration of teeth defect and veneer
Package:
REFILL:
Light Cure Composite: 4g/Syringe*5
Syringe Needles : 5pcs/ box*1
Total Etching Adhesive: 5ml/Bottle*1
Etching Gel: 2.5ml/Syringe*1
Applicators Brushes: 20pcs/box*1
Net weight:
188.4g
COLOR:
A1,A2,A3,A3.5,B1
FEATURES & ADVANTAGES:
Unique dispersion technology ensure the filler evenly distributed
Radioopaque and fluoride releasing Optimal polishability and high shade stability.
Excellent handling, not sticky to instrument;
Suitable for most cases of restoration, extensive indication of usage
INSTRUCTIONS
：
(1)Preparation: isolate and prepare tooth.
(2)Cleaning: rinse the preparation with water.
(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.
(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA):
dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).
(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.
(6)Applying Dentex light cure composite (DLC): place selected DLC into
cavity preparation following by light cure. According to following
table, the curing time is recommended for different depth and color
shades. In order to reduce shrinkage stress, for a large cavity, an
increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.
(7)Finishing: after light cure, adjust restoration.
(8)Polishing: use polishing strip or disc to polish the surface.
WARNING:
Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol.
PRECAUTIONS:
Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention.
ATTENTION:
To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product.
STORAGE:
Store at 25℃ or less in a cool and dry place and avoid direct sun exposure.
Recap the syringe after use.
DISPOSAL:
After the product is used up, dispose it as normal medical rubbish.
SHELF LIFE:
3 years
——————————————————————————————————————————————————————
Temporary Filling Flow Composite Resin
Description:
Light Curing temporary Composite Resin Used before dental prosthetic installation as temporary filling material to isolate prepared dental cavities from the extreme oral conditions.
Light curing composite resin in adequate release to be directly discharged to the dental cavities through disposable tip for easy apply.
No easily deviation till dental prosthetic installation
Singly and wholly removed
No dentritus inside dental cavities after removal
Excellent sealing ability adhesive to the side of dental cavities
Easy checks for leftover after removal
Elasticity allows masticatory some degree
Applications:
Temporary restoration for inlay, on lay cavity
Temporary obturation of implant screw access canals.
Blocking temporary sealing
，
Excellent sealing ability.
The filling color is blue
Expires in 3 year
Temporary Light Cure Cuomposite is not indicated for use as temporary crown and bridge material.
1.RECOMMENDED USE
Temporarily fill the cavity
(1). Preparation, relining and impression taking are done as usual.
(2). Clean and dry the cavity.
(3). Place and model a sufficient amount of DX.TEMP into the cavity using a suitable instrument.
(4). Light-cure layers with a thickness of up to 5 mm for 20 seconds, layers with a thickness of up to 7 mm for 40 seconds. Fill and light-cure deeper cavities in layers.
(5). Remove excesses, shape and finish as usual. Polishing can be done with a polishing paste using polishing cups or discs.
Removal of the temporary inlay
(a). Insert a suitable instrument such as a probe or a scaler into the temporary inlay and extract the material from the cavity, preferably in one piece.
(b) Clean the cavity with a rubber cup/a small brush and cleaning paste.
2.Composition
Inorganic and organic filler in a matrix of multifunctional acrylates; catalysts, stabilizers, additives.
Free from methyl methacrylate and peroxides.
3.Technical specifications
Shore-D hardness
≥
40
Packing list:
2.5g
Syringe
5 Tips
----------------------------------------------------------------------------------------------
Composite Resin A2
Description:
All Class of direct restoration for anterior and posterior.
Indirect restoration such as Veneer,inlay and onlay.
Core buildups.
Advantages:
1. Solution of simplicity with universal shade
The shade of DX.Universal Composite matches with VITA classic shade guide. Therefore single shade restoration can be applied as conventional & ordinary solution.
2. Nano hybrid technology
DX.Universal composite is applying unique nano hybrid dispersion technology to maximize the load of fillers by controlling the size and distribution of particles. It dramatically increased composite physical properties and notably improved the smooth surface of restoration in comparision with traditional micro hybrid or hybrid composite.
3. High Radiopaque.
Fluoride releasing to prevent recurrent caries.
Excellent handling.
Extensive indications that suitable for most cases of restorations.
This is  A2
We Have Color Available: A1, A2, A3, A3.5,B1,B2
FDA Statement：
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.
If so, you can bid on this item only if you are an authorized purchaser.
If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name:sinodental
City,State:SHENZHEN,China
Telephone number:0755-35590238
The goods you odered will be posted out in the second working day after the paymet has been made.
(We will inform you via email if any delay occured due to holiday events.
General shipping time is between 7-12 working days. (After the shipping started, the order will be
monitored and the track of the item will be posted on paypal.