Dental Orthodontic Bonding Bracket Light Cure Adhesive/DENTEX Composite/ DX Bond

Description

Dental Orthodontic Bonding Bracket Light Cure Adhesive/DENTEX Composite/ DX Bond
Description
Description
：
EXP:12 month
No-Mix Bonding Resin:
1. This product is one kind of orthodontic direct bonding system resin with aromatic bis dimethyl acrylate resin as its main material.
2. As a new-type orthodontic direct bonding system, it is convenient to use with little waste, easy to handle independently and has a favorable clinical bonding strength.
3. It consists of primer and paste with acid etchant, spatulas and small brusher as its accessories.
Preparation: Clean tooth enamel surface,eliminate tooth contamination,rinse then isolate tooth and blow-dry.
Etching:Etching the enamel of the tooth with acid etchant for 50 or 60 sec. Rinse and dry with clean air. If the enamel does not have a chalky appearance, pls. repeat the process;
Brushing: apply a thin layer of the primer over the etched enamel with the brusher;
Bonding: apply another thin layer of the paste to seal the edges, adjust the bracket within 20 sec, give pressure for 5 to 10 secand remove the excessive primer and paste after 40 to 60 sec; then do orthodontic procedures followed 5-min curing.
Packaging Detail:
3 x black syringes (3.5g)
1 x primer bottle (10ml)
20 x Brushes
Picture disply
Light Cure Resin:
Warning: Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.
Precautions: A void eye and skin contact. Wear gloves when handing this material.
Precaution:Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light
This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive
Contents:
3 x Adhesive paste Syringes (10.5g)
1 x Primer Bottle (8ml)
40 x Brushes
1 x Instruction Booklet
Blue Glue
Orthodontic Adhesive: Designed for bonding of metal and ceramic brackets on enamel.
It is of high viscosity and thus prevents bracket drifting and reduces material waste.
As it is light cured extra working time is ensured and therefore accurate bracket placement can be obtained.
INDICATIONS FOR USE: Direct bonding of metal and ceramic brackets
This orthodontic adhesive provides a longer working time and a rapid setting time. Can be placed directly into bands. Excess flash is easy to clean up prior to the light curing and the cement is easy to see due to the blue color.
It contains fluoride to reduce the chance of declacification.
Packing list:
1 x Etchant acid Gel 2.5ml syringe;
1 xLight Cure Adhesive Paste 5g syringe;
1 x Syringe tip
Store at 25℃ or less in a cool and dry place and avoid direct sun exposure. Recap the syringe after use.
Light cure restin
Warning: Ortho-Bonding primer and adhesive contains acrylate monomers. Acrylate monomers are known to produce allergic skin reactions in certain sensitive individuals. May cause eye and skin irritation.
Precautions: A void eye and skin contact. Wear gloves when handing this material.
Precaution:Please follow manufacturer's directions on the handing, proper use and recommendations for eye protection, when using a curing light
This system is designed to be used at room temperature (20-25°C, 68-77°F)。Storage between 2-27°C/35-80°F Light Sensitive
Contents:
3 x Adhesive paste Syringes (10.5g)
1 x Primer Bottle (8ml)
40 x Brushes
1 x Instruction Booklet
Composite：
Brand:Dentex
Color Available: B1,A2, A3 ,A3.5 ( 4g/ pc )
Universal composite for anterior/posterior dentine and enamel
High radiopacity
Fluoride release
High strength (compressive strength>480MPa)
INDICATIONS FOR USE:
Direct anterior and posterior restorations
Compatible with glass ionomer resin material
Cup buildup
Core buildup
Indirect anterior and posterior restorations including inlays, onlays and veneers
Please note: If you have other requirments, pls note us in your order. Thanks in advance!
DX.BOND V
Dental Light Cure Dentin Enamel Resin Bonding Adhesive
1. 5th generation adhesive for all classes of direct restoration.
2. Post and core bonding.
3. Ceramic veneer/crown/inlay and other indirect restoration bondings.
DX bond VII
Advantages:
1. High bonding strength and long lasting durability.
2. Easy infiltrate to dentin tubules.Reduce the risk of post-operative sensitivity.
3. Compatible with all light cure restoratives.
4. Time saving and easy to use.
5.DX.BOND VII contains MDP monomer which creates chemical interlock with enamel and dentin.It can also generate very good water-proof seal.Therefore the bonding strength is very high and long lasting.
6. There is no need to etch dentin before applying adhesive.It is really time saving and easy to use.
7. For enamel bonding,DX.BOND VII is optional for selective etch technology when high bonding strength is required.A separate enamel etching can be applied to get better enamel bonding result.
Usage:
1. Enamel bonding :30 seconds DX.Etch37 etch on enamel then apply 5th generation adhesive.
2. Dentin bonding:15 seconds DX.Etch37 etch on dentin then apply 5th generation adhesive.
Package: 3ml/Bottle
Acid Etching Gel 37%
Features:
Denterx etching gel is a polymer thickened gel for use on enamel and dentin.
This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding.
Packages: Refill: 5 ml/syringe, Instruction X1
Indications:
The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue.
Treat dentin and enamel, Treating agent on dental restorative material.
1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice
2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds.
Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.
3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant.
4. Remove exces moisture from the tooth and proceed with the applicaton of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive.
DX.CORE A2/A3
Dual Cure
Excellent flow consistency
High flexural strength
High compressive strength
Dual cure (light and self cured)
It is light cured in a few seconds
Shade:A2/A3
Packing:
1X 8.0g Syringe
5 X Mixing Tips
5 X intraoral Tip
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Note:
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, Thank you!
International Buyers – Please Note
：
1. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
2. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying
.
Feedback
We will automatically leave a positive feedback to everyone who has completed the transaction and leave us positive feedback.
Please do not forget to give us Five Stars on all of the Detailed Seller Ratings. Thanks!
In the unlikely event you are not satisfied with the transaction; please contact us before you submit your evaluation. We believe that everything could be solved by communication.
1. In order to provide you the best service, please treat the transaction fairly, feedback is simply what we pursue.
2. Please do contact us first to get a better solution before you would leave a neutral or negative feedback.
3. We strive for 5-star service by stating upfront our policies, our shipping rate& our shipping frequency. If you were pleased with this transaction, please respond with all 5 stars! If you are not pleased, simply let me know via e-mail rather than leave low score, and I'll work to make it that way. Because leaving me negative feedback does nothing to work out this issue.
4.
Please email me through 'MY MESSAGES' or "Ask Seller Questions" if you have any question about our listing or your purchase
Shipping
In the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events.
General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal.
Payment
We accept ebay payment only!
Returns
If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund.
We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.
You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.
Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!
Contact us
If you have any problems, we are very glad to help you. We are handling large volume emails every day. Please allow us to reply your email within 24hrs.
For the functional products in our shop (such as: Chargers, Data cables), which function is the same as description, but the actual color and shape may look a little different from pictures because of the technical improvement and actual stock state. Please be advised before you bid.