Koldlok 1010 Integral Raised Floor Grommet

Description

This listing are for 1 pc
Koldlok 1010 Integral Raised Floor Grommet  . The photo are for
referent
what I have instock
General Information .
Effective installation of cables to minimize any air loss from under raise floor/wall/ceiling plenum .
KoldLok Integral Raised Floor Grommet PART No 1010 Code : 46-1000-1010
The KoldLok® Integral raised floor grommet is ideally designed for new installations and fits into the raised floor tiles prior to the installation of the cabinets.
When fitted at the edge of a floor tile it will allow cables to be removed.
Alternatively it can be used to go around existing cables that come through the centre of a tile where a flush finish is required,
without the need to disconnect them.
Based on measurements at multiple data centres, between 50% - 80% of conditioned air is not reaching the air intake of IT equipment due to unsealed flooring openings.
This lost air, known as bypass airflow, contributes to IT equipment hot spots,
cooling unit inefficiencies and increasing infrastructure costs.
By sealing cable cut-outs with KoldLok raised floor grommets you can address this bypass airflow,
so drastically improving the cooling capacity within the data centre and preventing the detrimental effects bypass airflow has.
Features
KoldLok integral raised floor grommet
Increases existing cooling unit capacity
Reduces the need to purchase additional cooling units
Improves equipment reliability and extends equipment life
Increases static pressure under the raised floor and improves cool air delivery through perforated tiles and floor grates
Facilitates Cold Aisle / Hot Aisle best practices
Overall dimension are: 11 inch x 8? inch x 1.6 inch (279mm x 210mm x 41mm
Usable cable opening of 8 inch x 4 inch (203mm x 102mm)