Macraigor VTC1000 WiFiDemon OCDemon JTAG Integrated Development System

Description

Fast Shipping!
30 DAY MONEY BACK GUARANTEE!
Burns Brothers Buys is selling,
Macraigor VTC1000  WiFiDemon OCDemon JTAG Integrated Development System
Excellent condition. Comes only with what is shown in the pictures.
(MANUAL)
macraigor(dot)com/downloads/WifiDemon_manual.pdf
What exactly is the WifiDemon?
Many modern CPUs have one or another form of On Chip Debug (OCD). This may take the form of BDM (Background Debug Mode), JTAG (IEEE 1149.x), EJTAG (Extended JTAG), OnCE (On Chip Emulation), COP, or one of many others. All of these comprise an electrical/timing specification as well as a communication specification. The WifiDemon is a microprocessor-based device that “translates” commands from a host debugger into the appropriate OCD format and communicates with the target CPU under test. The WifiDemon communicates with the host debugger via Ethernet and/or, WiFi channels and can communicate with the target CPU in a wide variety of OCD formats including all of those previously mentioned as well as others. Because there are so many OCD formats, each with its own electrical characteristics and pin outs, the WifiDEMON uses a “personality module.” This is a small external module that connects to the front of the WifiDEMON with circuitry to modify any necessary signals and present to the target CPU the correct signals with the correct pin out. Because the WifiDemon is a Linux Based device all of the software tools that Macraigor Systems provides for free on our web site are installed on the WifiDemon. As a result the WifiDemon can be used in two ways: 1) As a replacement for an mpDemon. Providing the same host to target functionality, using the same host software configuration settings. 2) As a software development environment. A remote host can open a VNC (virtual network computer) window into the WifiDemon’s desktop. From there the preinstalled Eclipse IDE, gnu toolkits, and JTAG connection can be used to build and debug software images residing either on the WifiDemon’s 40 gigabyte solid state disk drive or on host’s disk file system and accessed via NFS. The COM1 RS232 port can be connected to your target system to allow you to communicate with your target system remotely. The 5V and 12V power outputs can be used to remotely power on/off your target system. © 2012 Macraigor Systems LLC USER’S MANUAL Revision 1.1
What software is installed in the WifiDemon?
The WifiDemon is a fully functioning Fedora Core 15 Linux system. With the following Macraigor, Eclipse, and gnu tools pre-installed: o Eclipse Juno o Gnu Toolkits (gcc/gdb/binutils) for ARM, MIPS, PowerPC, Coldfire, Xscale, and Atom x86 families of CPUs o Example Eclipse/Gnu projects (including Eclipse configuration, source, makefile, ldscript, gdbinit, and README files) that can be built, downloaded via JTAG and then and run on over 150 different evaluation boards o WifiDemon Configuration Utility – an interactive system setup tool that displays and allows the user to change, the ethernet configuration, WiFi configuration, ocdremoteServer settings/status, 5/12 volt output settings, and APIServer status. o WifiDemonConfigurationUtility-tui - a serial version of the WifiDemon Configuration Utility that runs over the USB to Serial cable. This lets the user configure the WifiDemon via an xterm serial port emulator. o AsmDasm – a RISC single op-code Assembler/Disassemble. o OCD Commander – an assembly language level debugger useful during board bring up o JTAGScanChainAnalyzer – displays the JTAG scan chain configuration and the devices it contains o OcdRemoteServer – a utility that waits for either local or remote host gdb connections on it’s dedicated TCP/IP port(s) performs the gdb command to JTAG translation. o COM1 Terminal Emulator – Serial port to target terminal emulator o APIServer – a utility that waits for and then services remote host OcdCommander connections to the WifiDemon.
The photos are of the item you are purchasing so please view all of them to verify condition. Please do your part in making an informed purchase by carefully viewing all photos and asking the important questions. We try to minimize mistakes and returns because it is inconvenient for both the buyer and the seller. If you have any questions or concerns please contact us before you complete your purchase so that we can ensure a smooth transaction. Thank you for shopping with us and be sure to check out the other items at our store Burns Brothers Buys. 1.3