New DDR2 & DDR3 RAM Memory Slot LED PC Computer Diagnostic Analyzer Tester Card

Description

Please give me 2 minutes to read note as below:
It is powered by CR2032 or 20 pin power plug, it does not include the CR2032 battery.
All part numbers and the photo must match for proper compatibility. Please do not just look at the title model to buy,
You need to physically match up the one you need with the picture and part number.
Be sure to remove your existing part from your machines，As each model in a series may be configured differently and use different parts.
Our list is just a reference and you may find your model differs.You need to physically match up the one you need with the picture and part number. otherwise, we are not responsible for mistaken purchase.
Will usually ship within 48hours of receiving cleared payment.
Please feel free to contact us if you have any questions.We will solve your questions as soon as possible!(except Sun.&most national holidays.)
Features:
DDR2 and DDR3 instructions for use with LED light tester
1. The DDR2 test method:
The DDR2 test is divided into two parts, the first part of the test for LED lights, use the battery or ATX20 power can be, will tester inserted into the mainboard DDR2 slot (note: the power CONNECTOR on the main board of the various from removed), press tester switch, among observation two rows of LED lights, all light and brightness is OK, such as LED not bright or high brightness is corresponding signal for open or short circuit, the second part is the current test, can only be used ATX20 power, will ATX20 insert tester. A multimeter to dc 200 MA file out, whose hands inserted into the red TP1 tester hole, the black one on the tester anlaogue display measurement test point signal current.
2. DDR3 test method:
DDR3 only need to use LED lamp test, use the battery and ATX20 power can be, will tester inserted into the mainboard DDR3 slot (note: the power CONNECTOR on the main board of the various from removed), press the switch on the tester, observe three rows of LED lights, all point (except some motherboard, a portion of the different LED not bright, CLK2, CLK2 only in the test to light, MA15 DDR2, DQS8, according to design DQS8 judge) and bright and brightness is OK, such as LED not bright or high brightness is corresponding signal for open or short circuit.
Suggest using DDR2 and DDR3 and protect notch protect notch DDR2 and DDR3 protection of gold finger.
Description:
DDR 2 & DDR 3 Memory Slot tester is used to test open circuit or short circuit of PC mainboard memory slot. When the mainboard generate alarm for memory failure, while the memory would not work or when the mainboard work well and the memory size does not show enough, It can be used to test the error.
Remark: when testing motherboard memory slot, most repairers only test using a very expensive ram machine to diagnose it. This tester is suitable for some inital checking for the slot instead this kind of complex equipment. It is difficult to repair it successfully for using multimeter to test every slot footpin of motherboard. By using our tester, it is easy and save time to see the open circuit or short circuit point through the signal on board
It is powered by CR2032 or 20 pin power plug, it does not include the CR2032 battery.
Item contains : 1pcs
Compatible Part Number : (will be random ship out)
Part Number :
ID: 1026
Note: Pls check the listing item photo and part number with your item. It's 100% full tested working. Random Ship Compatible part number, In bulk packaging, may have very minor scratches from long time storage or transportation,if you are very care about the item conditions,pls contact us before you make purchased.Thanks.