PC Desktop Computer Mainboard DDR2 & DDR3 RAM Memory Slot Diagnostic Tester Card

Description

Please give me 2 minutes to read note as below:
It is powered by CR2032 or 20 pin power plug, it does not include the CR2032 battery.
All part numbers and the photo must match for proper compatibility. Please do not just look at the title model to buy,
You need to physically match up the one you need with the picture and part number.
Be sure to remove your existing part from your machines，As each model in a series may be configured differently and use different parts.
Our list is just a reference and you may find your model differs.You need to physically match up the one you need with the picture and part number. otherwise, we are not responsible for mistaken purchase.
Will usually ship within 48hours of receiving cleared payment.
Please feel free to contact us if you have any questions.We will solve your questions as soon as possible!(except Sun.&most national holidays.)
Features:
1. Supports for intel / AMD motherboards with DDR2 and DDR3 interfaces without external power supply.
2. Use LED to indicate the open and short circuit of the data line address line, used to repair the motherboard that is not turned on.
3. Due to different motherboard design, some lights may not be lit. Can use the same motherboard to judge the fault.
4. When testing the motherboard of DR3, as long as the lamp is fully lit, it means normal, no need to test the resistance of the address line.
5. Finished by heat treatment, it is high hardness and durable.
Specification:
Material: PCB
Interface: for AMD / intel motherboard DDR2 DDR3
Scope: desktop
Size: 13.3 * 6 * 1cm / 5.2 * 2.4 * 0.4in
Weight: approx. 28g
Pakage list:
1 * Tester Card
Instructions for use:
1. Install the 3V (CR2032) battery on the tester, test each memory slot of the corresponding DDR2, DDR3 motherboard. The motherboard does not have power, press the button switch on the tester, the test lamp is all bright and the brightness is the same. The signal line is normal, if the light does not shine or special bright, this signal has open circuit short circuit fault. (Note: In the test for intel motherboard, motherboards do not connect the CPU and a variety of connection cards can be measured in the test for AMD motherboards (such as 940 motherboard, AM2 motherboard, 1207 motherboard, 1366 motherboard), to plug in CPU, test light Will be bright.
2. In the test DDR2 motherboard, the address line no pull-up exclusion, all the lights all bright, that normal, if the pull-up exclusion, the address line lights, only that exclusion no open, but also with the pointer Table to further determine whether the BGA address line open. (How to determine whether the pull-up exclusion, the pull-up exclusion generally are designed in the memory slot next to the general There are several exclusion, one end connected to the address line, one end of the power supply)
3. Pointer table to determine the address line method: the pointer table is pulled to X1 that is one ohm of the stalls, black table pen then motherboard, measured with a red table pen, respectively, DDR2 address line measurement hole, address line resistance that BGA address Line without welding, such as a larger swing, indicating that there are BGA solderable PCB or broken wire failure.
Item contains : 1pcs
Compatible Part Number : (will be random ship out)
Part Number :
ID: 19838
Note: Pls check the listing item photo and part number with your item. It's 100% full tested working. Random Ship Compatible part number, In bulk packaging, may have very minor scratches from long time storage or transportation,if you are very care about the item conditions,pls contact us before you make purchased.Thanks.